Announcement

Collapse
No announcement yet.

Building a core areator

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
    deere_x475guy
    Senior Member

  • deere_x475guy
    replied
    You bet I would. I want to adopt it to use hydrolic dump....sounds like fun. Can't wait to see the pics.

    Leave a comment:

  • Dave Haak
    Senior Member

  • Dave Haak
    replied
    THE BUCKET

    Bob,

    Yes I did.

    It's obvious you know where I got the idea. I had not seen anything quite like it. I have e-mailed Mr. John Sheele a couple of times. When I completed the THE BUCKET...I.......... boldly sent him pics of it....not knowing exactly what to expect. He replied with compliments and a request for more pics showing it working. I was relieved! I later sent pics and info showing the "trip and reset from the seat" features (without using ropes) that I came up with (original, honest- my own design). I have not seen them posted on his site in the new ideas area. I posted several pics of it on this site several weeks ago. Let me know if you would like to see more detailed pics. It was a fun project.

    Dave

    Leave a comment:

  • deere_x475guy
    Senior Member

  • deere_x475guy
    replied
    Re: Aerator

    Originally posted by Dave Haak
    Bob,

    Great project!! I've always thought that a plug-type aerator is better than a spike-type. You have tackled quite a project. Keep the pics coming!

    Some time ago I "wimped-out". The spoons made me nervous. I went with the spike-type. I knew I could do just plain round things.

    I know this is the wrong color/brand of equipment, .........not 3-point hitch and ....not plug-type but can't resist showing my version.

    I hope this doesn't contaminate your post.

    It's BRRRRRRRRRRRRRRRRRRRRR here too! Also starting to get white.


    Dave, Did you build that front bucket? Or is it the Johnny Bucket. I am planing on building something like this later in the spring to hook up to my front hydrolics that the plow uses.

    Bob
    Dave

    Leave a comment:

  • deere_x475guy
    Senior Member

  • deere_x475guy
    replied
    Re: Aerator

    Originally posted by Dave Haak
    In case you make something with a tongue that needs to pivot & swivel.........some ideas.

    Dave
    Hmm...I like that. I am sure I will sooner or late have a need to use this also...thanks...


    Bob

    Leave a comment:

  • deere_x475guy
    Senior Member

  • deere_x475guy
    replied
    Re: "Spoons"

    Originally posted by stranglehold
    Very interesting project. I have always wanted one of these but I have a problem with wanting something that is "overbuilt" rather than settling for buying some lightweight imported piece of junk.

    Anyway, it seems to me that the spoons that I have seen have ben formed out of flat stock of some sort. I have not looked at a commercial model (such as at a golf course). Maybee they are different.

    What about 3/4" inch square tube? It may be easyer (?) to modify that to get the plug to be ejected out of the top. What kind of projection are you thinking about?

    My yard will require something rather heavy to produce adeqate penetration, are you planning on overbuilding this to build in the weight, or are you planning on adding removable weight?

    I modified my 3 point grader blade to accept front weights from a tractor and it made a GREAT difference in performance.

    Looking forward to pictures!!
    Strange Hold, It should come in close to 300# I image without weight. The top will be set up to add 5 gallon water contains or what ever for extra weight if needed. My tractor will handle 650# on the 3 point so I can always add extra if needed. This project is one that compelled me to get back into welding again. I knew I could by the mig set up and buy all the materials for building this and still come in cheaper than buying one already built. Plus have the satisfaction of building it myself. I prefer to build things myself when ever possible (everytime I look at something I have built I get a great big smile).

    The next project will be a front bucket (simular to the johnyy bucket). The maybe up to a front end loader. Who knows.

    Bob

    Leave a comment:

  • deere_x475guy
    Senior Member

  • deere_x475guy
    replied
    Re: Aerator

    Originally posted by Dave Haak
    Bob,

    Great project!! I've always thought that a plug-type aerator is better than a spike-type. You have tackled quite a project. Keep the pics coming!

    Some time ago I "wimped-out". The spoons made me nervous. I went with the spike-type. I knew I could do just plain round things.

    I know this is the wrong color/brand of equipment, .........not 3-point hitch and ....not plug-type but can't resist showing my version.

    I hope this doesn't contaminate your post.

    It's BRRRRRRRRRRRRRRRRRRRRR here too! Also starting to get white.

    HAHA...HI Dave, I have seen those and used them. The core type is suppose to have more benefits. I have used the cheap one pull behinds before and was not very happy with them. Thats why I decided to build my own. The good ones that do the job are over $800.00 and I know I can build this for less that $200.00.

    Color never made a difference to me in anything. I am not biased to deere at all. The dealer in our area for JD is very good. No real cub dealers around that I was happy with. I also looked at the Kabota which I thougth was one heck of a tractor.

    I will keep everyone posted as the project comes along. I will also have cad design posted when its completed.

    Thanks
    Bob

    Dave

    Leave a comment:

  • stranglehold
    Member

  • stranglehold
    replied
    "Spoons"

    Very interesting project. I have always wanted one of these but I have a problem with wanting something that is "overbuilt" rather than settling for buying some lightweight imported piece of junk.

    Anyway, it seems to me that the spoons that I have seen have ben formed out of flat stock of some sort. I have not looked at a commercial model (such as at a golf course). Maybee they are different.

    What about 3/4" inch square tube? It may be easyer (?) to modify that to get the plug to be ejected out of the top. What kind of projection are you thinking about?

    My yard will require something rather heavy to produce adeqate penetration, are you planning on overbuilding this to build in the weight, or are you planning on adding removable weight?

    I modified my 3 point grader blade to accept front weights from a tractor and it made a GREAT difference in performance.

    Looking forward to pictures!!

    Leave a comment:

  • Dave Haak
    Senior Member

  • Dave Haak
    replied
    Aerator

    In case you make something with a tongue that needs to pivot & swivel.........some ideas.

    Dave

    Leave a comment:

  • Dave Haak
    Senior Member

  • Dave Haak
    replied
    Aerator

    Bob,

    Great project!! I've always thought that a plug-type aerator is better than a spike-type. You have tackled quite a project. Keep the pics coming!

    Some time ago I "wimped-out". The spoons made me nervous. I went with the spike-type. I knew I could do just plain round things.

    I know this is the wrong color/brand of equipment, .........not 3-point hitch and ....not plug-type but can't resist showing my version.

    I hope this doesn't contaminate your post.

    It's BRRRRRRRRRRRRRRRRRRRRR here too! Also starting to get white.

    Dave

    Leave a comment:

  • deere_x475guy
    Senior Member

  • deere_x475guy
    replied
    Originally posted by Arbo
    Bob,

    I have also seen these set up with a dumping box that collects the plugs as you go. It never catches all of them, but it cleans up some of the mess left behind. Just a thought...
    Yes Arbo I have seen this set up also. I prefer to leave them on the soil to add back to the nutrients. They totally disappear within a week or so. I have some poorly draining areas that is very heavy clay. I top dress the soil after coring with a mix of compost and top dressing. This will gradually over the years help to make the soil better.

    I have pretty much worked out the spoon design and will post things as I make some progress. It's pretty dang cold up here right now and my garage is pretty cold at the moment. It's well insulated and the lighting usually helps to warm things enough to be a bearable high 30's to mid 40's but this cold snap has it in the twenties.......BRRRRRRRRRRRRRRRRRRRRRR


    Bob

    Leave a comment:

  • Arbo
    Senior Member

  • Arbo
    replied
    Bob,

    I have also seen these set up with a dumping box that collects the plugs as you go. It never catches all of them, but it cleans up some of the mess left behind. Just a thought...

    Leave a comment:

  • deere_x475guy
    Senior Member

  • deere_x475guy
    replied
    Originally posted by bitternut
    I think I would fabricate everything but the spoons. They say they are bolt on so I am sure that is a part that needs replacing frequently. They probably sell them somewhere. What do the spoons look like? Are they roll formed like a roll pin would be or what? Frame made out of solid 1-1/2 bar stock? That ought to be rugged enough. I'm guessing that this contraption pulls a round plug out of the turf right or does it just punch a hole in the ground?
    Bitternut, I really wanted to make these myself so I can keep a supply of replacements on hand. Plus I enjoying doing things myself.

    The spoons are generally nearly round with a slit at least a third the diameter cut most of the way up the lenght of the tube. Then a wider slit cut the rest of the way to the top to allow the core to be pushed out by the next core. The frame will be made out of 1 inch square by 1/8 inch tubing and spread steel will be used to cover the top and sides. Pretty much like the picture in the link I posted at the start of this thread. It will end up pulling a round plug out of the turf and laying it back on the lawn. It looks like a goose has pooped all over your lawn for a week or so afterward....

    Leave a comment:

  • deere_x475guy
    Senior Member

  • deere_x475guy
    replied
    Originally posted by Arbo
    Bob,

    How about pieces of schedule 80 black iron pipe. You could get the diameter that you desire and cut it to length. The edgescould be sharpened with a grinder. I don't think that you would have any problem with the pipe bending as long as you did it while the ground is still wet in the spring. Will you weld these on? I was thinking that maybe you would want to bolt them on for sharpening and replacement when needed. Let us know how you make out with it.
    Arbo, thanks. I was thinking about going this way. They will be bolted on.

    Bob

    Leave a comment:

  • bitternut
    Senior Member

  • bitternut
    replied
    I think I would fabricate everything but the spoons. They say they are bolt on so I am sure that is a part that needs replacing frequently. They probably sell them somewhere. What do the spoons look like? Are they roll formed like a roll pin would be or what? Frame made out of solid 1-1/2 bar stock? That ought to be rugged enough. I'm guessing that this contraption pulls a round plug out of the turf right or does it just punch a hole in the ground?

    Leave a comment:

  • Arbo
    Senior Member

  • Arbo
    replied
    Bob,

    How about pieces of schedule 80 black iron pipe. You could get the diameter that you desire and cut it to length. The edgescould be sharpened with a grinder. I don't think that you would have any problem with the pipe bending as long as you did it while the ground is still wet in the spring. Will you weld these on? I was thinking that maybe you would want to bolt them on for sharpening and replacement when needed. Let us know how you make out with it.

    Leave a comment:

Working...
X