enclosed trailer plans-material source

[Chris P.]

I am looking for some plans for an enclosed trailer (6 x 10 approx) and also a good source of corners, door hardware etc.....

Thanks in advance!!

[jason]

Chris, I have been building a 6x10 enclosed trailer and perhaps I can be of help. I drew up the plans myself and your'e welcome to them but you'll need access to Autocad as I have no paper copy. Most of the special parts I used are manufactured by Redneck trailer parts www.redneck-trailer.com although if I were to do it over again I would try to avoid redneck parts as much as possible. I have found that haulmark www.haulmark.com sells parts directly and I would probably go that route if I were to do it again. Of course, changes would need to be made to the plans in that case. You can check out the thread on my trailer at http://www.hobartwelders.com/mboard/...hlight=trailer

If you have any questions feel free to ask, I will help if I can.

Jason
________
herbalAire vaporizers

[Ryel]

Originally posted by jason
Chris, I have been building a 6x10 enclosed trailer and perhaps I can be of help. I drew up the plans myself and your'e welcome to them but you'll need access to Autocad as I have no paper copy.
Jason

I would apprecciate a copy and I can import *.dwg files.
thaks

[email protected]

[Novanut]

Jason, i would like a set of the plans, if possible. My addy is [email protected] thanks

[e-z-ride.com]

Can I get ACAD file too ?

Jason:

I viewed your trailer project, and all I can say is:

WOW!

Can you send me a copy of your plan ? I would love to see how you came up with it on CAD, and to determine whether the project is manageable enough for me.

I am an old autocad guy, and I spent my former career designing products on Autocad, and then on Pro/e, and then on Solidworks.

you can email it to:

[email protected]

Thanks for posting this project. It inspires me to do something like this ! And hopefully, I can save some $$ to get me that welding generator.

[jason]

Ryel, Novanut and E-Z, I sent a copy of the layout to your e-mail. If you have any questions feel free to ask. I would like to help anyone avoid the bugs I had to work out.

E-Z, I spent about four years as a draftsman using Autocad. I have played with Pro/E a little but never tried Solidworks. I have seen Solidworks used and it looks real cool. If I ever get an opportunity I would like to learn it.

Jason
________
drug test kit

[jpmadrigal]

Ryel, Novanut and E-Z, I sent a copy of the layout to your e-mail. If you have any questions feel free to ask. I would like to help anyone avoid the bugs I had to work out.

E-Z, I spent about four years as a draftsman using Autocad. I have played with Pro/E a little but never tried Solidworks. I have seen Solidworks used and it looks real cool. If I ever get an opportunity I would like to learn it.

Jason

HI Jason,
I read about your project and liked your finished product. I am looking for a similar trailer for a mobile water treatment plant for Philippine project. Our required size is 1.8 m by 4.5 m by 2 m high. with 2 wheels each side. Can I request for your autocad design for me to refer. My email: [email protected] the treatment plant shall be manufactured in Thailand so with the trailer and we shipped to Manila.
kind regards. Lito

[acer]

trailer plans

Hi Jason,
I have just been asked to undertake some AutoCAD training in engineering and thought that your trailer would be an ideal project for my class. Would it be possible to send me a copy of the dwg file please. As I have previously only trained architectural cad I would also appreciate any other plans that you may feel suited to new engineering cad students.

Best regards,

Acer

[acer]

trailer plans

Jason,
Could you please send any plans available to [email protected]

Many thanks,

Acer

[Skipper]

AMEN!!!!!!!!!!!!!!!!!!!!!! to avoiding redneck trailer parts. Those folks are the most rude, confused, and wacked up bunch of people I have ever had to buy anything from. With that said I use Quality trailer parts ( branch in timmonsville s.c.) They are extrmely nice.

[Gorp77]

Any chance of getting these plans? [email protected] Thank you in advance.

[calweld]

For parts . . . . Hinges, latches, catches, slides, etc. check out:

http://www.allegiscorp.com/jsp/default.jsp

or

http://www.austinhardware.com/

[MidwestTrailer]

Chris, I have been building a 6x10 enclosed trailer and perhaps I can be of help. I drew up the plans myself and your'e welcome to them but you'll need access to Autocad as I have no paper copy. Most of the special parts I used are manufactured by Redneck trailer parts www.redneck-trailer.com although if I were to do it over again I would try to avoid redneck parts as much as possible. I have found that haulmark www.haulmark.com sells parts directly and I would probably go that route if I were to do it again. Of course, changes would need to be made to the plans in that case. You can check out the thread on my trailer at http://www.hobartwelders.com/mboard/...hlight=trailer

If you have any questions feel free to ask, I will help if I can.

Jason

Jason I would also like a copy of those plans. My email is [email protected]

[sf93]

Could I get a copy of those plans also? My email is jstemp at gmail.com. Thank you.

[Zrexxer]

Good luck. Jason's last post in this thread was four years ago...