Torch Holder TIG

Rocky D

What is that below grinder switch, operating/safety instructions?
I once saw shop that had them posted for everything. Vice, anvil, hammer, workbench, power machinery it all had safety/operating instructions posted nearby.

Here a picture of it.....Sycrowave 300 on the bottom and a XMT304 CC on the top. Hooks all over.

Re: Torch Holder TIG

Originally posted by TheOldOne
Lincoln Square Wave TIG
I fabricated this "torch holder" Kind of handy because at times there is no place to lay the torch down. Just 1/2" tubing, formed some brackets and bolted to the existing hole in the case. Works great and saves breaking the back cap.

Yeah, I do that, too...I have hooks and even a rod holder on my machine.....we call "point-of-use" in my plant. Ergonomics, etc.

The torch you have connected is what we use only for aluminum, and the other one you have there with the gas screen lens we use for most everything else.

[TheOldOne]

Lincoln Square Wave TIG
I fabricated this "torch holder" Kind of handy because at times there is no place to lay the torch down. Just 1/2" tubing, formed some brackets and bolted to the existing hole in the case. Works great and saves breaking the back cap.