recomendations for grinders?

[GWOL]

I went ahead and got the Milwaukee 6148 Model. 4.5", 8.5 amp. This should be more that enough for the type of grinding that I do and was not able to find any local dealers for the Hilti that Rocky D uses. Iam sure this will work great based on the info from the old forums.

Thanks again for all the input, and suggestions. I felt much better about going with my decision after getting some great input from the experts here.

[Guest]

Originally posted by GWOL
I went ahead and got the Milwaukee 6148 Model. 4.5", 8.5 amp. This should be more that enough for the type of grinding that I do and was not able to find any local dealers for the Hilti that Rocky D uses. Iam sure this will work great based on the info from the old forums.

Thanks again for all the input, and suggestions. I felt much better about going with my decision after getting some great input from the experts here.

Good choice, Gary....now you can put your nose to the grindstone

[Nelson Hendrix]

Grinders

I too like the 5 inch grinder. We use a Makita 5 inch with 12 amp motor to cut large stainless steel pipe in the field when plasma is not available. Works better than a worm drive saw.

Nelson

[GWOL]

Thats what they keep telling me when Iam at work also Rocky! I have already used it today to cut up some 1/4 " steel plate to practice welding on. Will be using some of the welding tech. you and dan showed.

[Dan]

Originally posted by GWOL
Thats what they keep telling me when Iam at work also Rocky! I have already used it today to cut up some 1/4 " steel plate to practice welding on. Will be using some of the welding tech. you and dan showed.

Don t be shy show us some pictures of your results. Maybe we can give you some help if needed by seeing the pics.

[GWOL]

Dan, Thanks for the help. I will take some pictures of the welds I have been making, or trying to make. I can sure use some advise, but remember in advance, that I just started welding about 6 months ago.

[Dan]

Originally posted by GWOL
Dan, Thanks for the help. I will take some pictures of the welds I have been making, or trying to make. I can sure use some advise, but remember in advance, that I just started welding about 6 months ago.

Gary

We all started out from zero. I personally can t even imaging trying to figure welding without some type of instruction from an experienced operator. I m just hoping that by having this picture option available that maybe the less experienced operators can post some of there welds. Then the more advanced weldors can offer some advice, which will help the less experienced person like yourself improve there skill level some. Actually Im not just limiting this idea to weld beads. as an example, maybe we might even go into the showing pictures of proper gun or rod angles or any other idea that someonre can think up to help someone out. I guarantee that you well never receive negative feed back from me.

[Al T.]

Don't worry about showing possible low quality welds. Some of the doooosies I come up with even makes the dog laugh. I can't decide if they look more like noodles or toothpast when the gas or the voltage settings are wrong. If I get a digital camera I'll send in a couple of my beauties, they should be labeled Oh My God!!

I'm putting together my next project right now, a new welding cart. Should be interesting.

Having lots of Fun!

[jbear]

grinders...et al. (archiveable)

Hello,

I have one of those 99 dollar milwaukee 4.5 inch 10k grinders. Use wire wheel, cup brushes, and grinding disks no problem. Does a pretty nice job. Can make it looks like there never was a weld (whew It's a fantastic machine. I checked on the Hilti one pontificated on earlier, and it is definately about as good as they get, at a buck eighty. Everything Hilti makes is the best. I'm grateful do have learned that a cutting wheel could be afixed. That seems alot more practical than the tiger saw.

I'll have to save up for one.

Been reading the board for some time, and am very happy with my new 110 v 135 wire feeder. Been successful with basic five inch squares, out of .5inch tube stock. Pretty neat. Might post some shots. Will build an artsey little CD rack this weekend out of 3/4"x3/16" flat cr, and 1/4" round cr (I think i might have gotten hot rolled actually). It seems to work effectively on paper. Still drawing up the shoe rack, anvil table, machine cart/dolly, front yard fence, pivoting top for a kitchen carving station, etc....ya know the simple stuff (wink wink).

Has anyone ever seem this guy's work:

http://www.artmetal.com/enrique/wrought/tables/nouveau/console/index.htm

Watch that guy pound the solid wrought iron stock (a 3"x8" cylinder of metal) into a faceted ball.

Working Metal is amazing.

I anticipate learning alot from you folks.

over,

bear

oh yeah. Primarily the welding will be applied to repair, reinforce, and reconstruction of a 1969 Ford Bronco tub. Frame too probably.

[Guest]

Re: grinders...et al. (archiveable)

Originally posted by jbear
Hello,

I have one of those 99 dollar milwaukee 4.5 inch 10k grinders. Use wire wheel, cup brushes, and grinding disks no problem. Does a pretty nice job. Can make it looks like there never was a weld (whew It's a fantastic machine. I checked on the Hilti one pontificated on earlier, and it is definately about as good as they get, at a buck eighty. Everything Hilti makes is the best. I'm grateful do have learned that a cutting wheel could be afixed. That seems alot more practical than the tiger saw.

I'll have to save up for one.

Been reading the board for some time, and am very happy with my new 110 v 135 wire feeder. Been successful with basic five inch squares, out of .5inch tube stock. Pretty neat. Might post some shots. Will build an artsey little CD rack this weekend out of 3/4"x3/16" flat cr, and 1/4" round cr (I think i might have gotten hot rolled actually). It seems to work effectively on paper. Still drawing up the shoe rack, anvil table, machine cart/dolly, front yard fence, pivoting top for a kitchen carving station, etc....ya know the simple stuff (wink wink).

Has anyone ever seem this guy's work:

http://www.artmetal.com/enrique/wrought/tables/nouveau/console/index.htm

Watch that guy pound the solid wrought iron stock (a 3"x8" cylinder of metal) into a faceted ball.

Working Metal is amazing.

I anticipate learning alot from you folks.

over,

bear

oh yeah. Primarily the welding will be applied to repair, reinforce, and reconstruction of a 1969 Ford Bronco tub. Frame too probably.

Welcome aboard, Bear...I'd like to see that CD rack...I need to make one for myself.