Hh 135

[Dan]

Hey ROCK

I picked me up a new HH 135 today. I really like the new toolless change on the drive rolls. However, I see one problem with the machine that Im going to have to fix. The gas hose from the solenoid valve was routed wrong and is being pinched off between two pieces of sheetmetal. Or is this a new fluxcore only design? Pinch the hose off and the operator can t use gas- Fluxcore only. It is a easy thing to fix, but I though you would want to know so that you could pass it on to whomever. By the way, I like the unique finish on the outside sheetmetal of the machine

[Scott V]

Hey Dan,I think you caught the same bug I have,only a little different strain.

[Bob]

So ... if open up my HH135 to look for (and maybe fix) routing in the gas tube, does that impact warranty?

Actually I was considering a "tee in" before and after the valve to add a manual "pre-gas" for poppy starts.

Bob

[Hobart Expert Steve]

Dan;

Thanks for the information on the Handler 135. I will pass it on to the production line today. Please provide me with the serial number so I can use it for reference with the production people.

Steve


[email protected]

[Hobart Expert Rock]

HI DAN..............I WILL DEFINATELY PASS ALONG THE INFO CAN YOU SUPPLY SERIAL NUMBER AND I WILL NOTIFY PRODUCTION LINE....... I'M SORRY FOR THE ERROR..........OPENING OF THE UNIT WHEN UNPLUGGED WILL NOT DAMAGE OR MAKE NULL AND VOID THE WARRANTY.................. DAN I'M GLAD YOU LIKE THE SIGNATURE SERIES OF THIS PARTICULAR UNIT............. OTHERS HAVE EXPRESSED THE SAME LIKEING................. ....ENJOY AND BE SAFE OUT THERE......................ROCK................... .........
[email protected]

[Dan]

Rock or his sidekick Steve

Sorry Steve you have sidekick status for now.

The serial number for the machine is LC 448301. Do to the way that I aquired the machine I can t complain one bit about this minor little error. Beings today is my 35 th B-Day this machine ended up being a nice little B-day present. I imagine there is one guy down south of me that has a big grin on his face too over one of these signature series machines.

[Hobart Expert Rock]

THANKS DAN I DO APPRECIATE THE INPUT.........AND THE SERIAL NUMBER WE WILL SHARE WITH AY FOLKS..........STEVE IS PRINTING IT OUT NOW AND WHAT A NICE BIRTHDAY PRESENT YOU GOT WASN'T IT.......................ENJOY..........HAPPY BIRTHDAY..... AND I'LL BET YOU CAN HAVE SOME FUN WITH THAT ONE NOW............... ......................ROCK......................[email protected]

[Hobart Expert Rock]

AWEAVER................ ..........WELL DON'T LAUGH NOW BUT IT HAS SOME SIGNATURES ON IT................NO......... NOT FROM ANYONE FAMOUS JUST SOME OF US HERE AT MILLER ELECTRIC ..............IT IS NOT A PROTYPE JUST SOMETHING FOR SERVICES PERFORMED...........STEVE IS NOT OFFENDED HE JUST LAUGHED AND SAID HE WOULD HAVE IT UNTIL I WAS GONE THE SIDEKICK STATUS SHOULD WE CHANGE IT TO KICKSTAND MAYBE AH MAYBE NOT....... .....,...ROCK[email protected]

[Scott V]

Rock,I thought if they made one that can really weld nice,they used the signatures to cover up the sp135 plus stickers.

I just could not resist that one.

[deere_x475guy]

Oh man...you guys are bad!!!!!!!!!!!!!!....

Bob

[Hobart Expert Rock]

................AWEAVER DEERE475 GUY.......... NO SORRY YOUR NOT EVEN CLOSE.........ROCK[email protected]

[Scott V]

Aaron,

did you notice he only included you two guys?

[Hobart Expert Rock]

HEY SCOTTV.............HAHAHA.........DO YOU WANT ME TO SIGN YOUR SP UNIT.................AH THAT WOULD BE SEND HER IN RIGHT............. ................... I DID NOT EXCLUDE YOU ON PURPOSE..... I JUST FIGURED WHEN YOU SAID YOU COULDN'T RESIST IT YOU DIDN'T WANT ME TO SIGN YOUR SP UNIT........ BUT I WILL IF YOU WANT..................................BE SAFE MAN...........ROCK[email protected]

[Scott V]

Rock,I would like that,but remember I traded my SP175 to my friend for his MM185.Then I traded that to get my MK 2000A back.So maybe just my 2210 Hobart Feeder,that's now a Thermalarc.What a nice little unit that one is.Lot's of styles of drive rolls.I think it compares pretty nicely to a R-115 Miller feeder,but only two drive rolls to mine.But thats fine for me,less rolls to buy,and it feeds great.

One more note,on the SP.My friend will leave it at my house until I make him take it.Which might be never.What a deal.

[cope]

Rock, you can sign my PowCon any time you are in Houston. Heck, you might have built it!