Announcement

Collapse
No announcement yet.

Stellite overlay using MIG process

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Stellite overlay using MIG process

    I need direction on overlaying Stellite 6 on 4140, using the MIG
    process. Preheat, wire size, speeds.
    Thank you-Rob
    Robby

  • #2
    I think your best bet would be to check out the manufacturer.
    Go to www.haynesintl.com and see if they can give you some info.
    work safe, always wear your safety glasses.


    Edward Heimbach

    Comment

    Working...
    X