Announcement

Collapse
No announcement yet.

gas settings

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Guest's Avatar
    Guest replied
    40 CFH should give you good results...it's not that critical...if you are icing your regulator just turn it down some.

    Leave a comment:


  • Bob
    replied
    Should be a decal with gas flow rates cfh (cubic feet per hour) on the inside of the cover on the wire feed side.
    Bob

    Leave a comment:


  • chriswelds
    started a topic gas settings

    gas settings

    i own a hobart 135. my question is was should my regulator be set at for argon mix. thanks
Working...
X