Announcement

Collapse
No announcement yet.

gas settings

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • gas settings

    i own a hobart 135. my question is was should my regulator be set at for argon mix. thanks

  • #2
    Should be a decal with gas flow rates cfh (cubic feet per hour) on the inside of the cover on the wire feed side.
    Bob

    Comment


    • #3
      40 CFH should give you good results...it's not that critical...if you are icing your regulator just turn it down some.

      Comment

      Working...
      X