Announcement

Collapse
No announcement yet.

Need a Converter Box for a SA200 Lincoln welder

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • pollock
    started a topic Need a Converter Box for a SA200 Lincoln welder

    Need a Converter Box for a SA200 Lincoln welder

    I need a converter box on my Lincoln SA200 F163 for the DC receptacle on the welder. I want to convert the 110DC to 110 AC so that I can run other electrical equipment from the welder. I was told a "Converter Box" is available. I would appreciate any help - many thanks,

    Pollock

  • Sberry
    replied
    Yup, thats what I would do but more than likely would hook it to the truck which has a better alternator if I needed to run tools. I have also seen them with the alt replaced with a 120V gen head and use a battery charger for the unit. Obviously for small stuff this is great, bigger you need to get a different machine.

    Leave a comment:


  • steelhanger
    replied
    Go to Sam's club, B.J.'s, or Northern.
    Get a good sized inverter.
    I put two 700 watt inverters on my pipeliner a few years back for the 'fancy' equipment that needs ac voltage.
    Use the dc for grinders and saws.

    Leave a comment:


  • Tim R.
    replied
    Good luck does pretty well cover it

    Leave a comment:


  • Sberry
    replied
    Good luck.

    Leave a comment:

Working...
X