Announcement

Collapse
No announcement yet.

welding gasses

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Nelson Hendrix
    replied
    Go GTAW

    The reply that tig was better suited for your job is right on the money. Better control, better looking welds, that will make your custom work even better.

    Nelson

    Leave a comment:


  • Guest's Avatar
    Guest replied
    TIG makes more sense building custom motorcycles than MIG because your dealing with small pieces and small welds. Custom motorcycles are about Looking Good in every detail and TIG makes pretty welds.

    You need Square Wave AC TIG welder for welding aluminum.

    Leave a comment:


  • Pin Head
    replied
    Trade it in for a TIG welder and you can use argon for everything.

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Your doing custom motorcycle building with HH175 MIG welder?
    I would really like to see pictures of what your building.

    Leave a comment:


  • Ed Heimbach
    replied
    welding gasses

    sosricky; go to weld talk home page, enter old board, search 'mix gas' , and 'mix gasses' . Hope this helps,Ed.

    Leave a comment:


  • Hobart Expert Dave
    replied
    Sorry to say but you can not use 100% argon to weld Steel you have to use either a mix gas of 75% argon 25% Co2 or 100% Co2. Argon is used for Aluminum only.
    Thanks
    Dave Evans

    Leave a comment:


  • sosricky
    started a topic welding gasses

    welding gasses

    i have recently started setting up my shop (small/home)custom motorcycle building
    my question is with the price of gas botteles can i use argon for an all around gas i weld mostly steel but have an ocasional need for aluminun fabrication/repairs
    i have a 175 handler mig set up
Working...
X