Tweet
What wire is recommended for 6061 AL in 0 state. Machine is HH 135, Ar gas
-
My politically correct no advertising/no ethnicity bashing/no shoving my religious(or lack thereof) beliefs down your throat moderator approved signature. For further info on making your own sig, subscribe to my secret yahpp gropu with over 300 members for $9.95 -
Re: What Mig Wire ??
ER4043. If your going to anodize then ER5356.Originally posted by banzaitoyota
What wire is recommended for 6061 AL in 0 state. Machine is HH 135, Ar gas
Lincoln sells a book for $15 (800+ pages) called The Procedure Handbook of arc welding. In it is a chart that list recommended filler wire for the different series of aluminum.. There is also a lot more useful information then this contained in the book too. You can purchase this book through Lincolns website.Last edited by Dan; 02-19-2003, 03:17 PM.MigMaster 250- Smooth arc with a good touch of softness to it. Good weld puddle wetout. Light spatter producer.
Ironman 230 - Soft arc with a touch of agressiveness to it. Very good weld puddle wet out. Light spatter producer.
PM 180C
HH 125 EZ - impressive little fluxcore only unitComment
-
Good Info!!! You can never have too many reference booksMy politically correct no advertising/no ethnicity bashing/no shoving my religious(or lack thereof) beliefs down your throat moderator approved signature. For further info on making your own sig, subscribe to my secret yahpp gropu with over 300 members for $9.95Comment
-
Take a look at the Miller Education Pack. You get 13 books and the MIG, TIG, and stick calculators for $25.
Education PackComment
Comment