Announcement

Collapse
No announcement yet.

Hobart 210 Help

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hobart 210 Help

    Thought i'd get a new welder, well I got a new hobart 210 mvp from northern tool and today after hooking everything up right when I turn it on I get the over temp light coming on, fans come on but no wire feed.

    this happens on 220 or 115

  • #2
    Welcome to the forum.
    Lincoln A/C 225
    Everlast PA 200

    Comment


    • #3
      Unplug the trigger switch connector from the front of the unit and then turn back on. I have seen the wires for the trigger lead get shorted in the gun cable and cause this condition. If the temp light goes out then the gun needs repaired or replaced. You can contact our tech group at 1-800-332-3281 if a replacement is needed.

      Keith

      Comment


      • #4
        Called Keith, problem solved...temp circuit wire had came loose inside the plug coming out of the transformer.

        now time to put this puppy to work

        Great Customer service!

        Comment


        • #5
          Great! glad you were able to resolve the problem.

          Keith

          Comment

          Working...
          X