Announcement

Collapse
No announcement yet.

Cutting head not shutting off oxygen

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cutting head not shutting off oxygen

    I have an ACCU Flame Western CB 731 cutting head on my oxy/acetylene CB 730 mixing chamber and the oxy will not shut off with the knob on the cutting head. I have taken the knob and needle out and inspected same and see no visible defects. I also removed the trigger handle and the needle valve and do see a slight imperfection in the washer on the end of the needle. Any help on how to get repair parts/service would be appreciated.

  • #2
    Welcome to Weld Talk....

    Might want to see if local welding supply can help... Some have qualified tech on site or can send it out...

    Or

    https://regulatortorchrepair.com/

    http://www.billswelderrepair.com/Torch_Reg.html
    "Fear The Government That Wants To Take Your Guns" - Thomas Jefferson..

    Comment


    • #3
      Check with these guys -
      https://regulatortorchrepair.com/

      Mac got there 1st.

      Comment

      Working...
      X