Announcement

Collapse
No announcement yet.

Hobart TG-301

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Northweldor
    replied
    Originally posted by boostedbbc View Post
    Sorry I think I might have posted this in the wrong forum can mod please move? Thanks
    You should just delete and re-post in the proper section.

    Leave a comment:


  • boostedbbc
    replied
    Sorry I think I might have posted this in the wrong forum can mod please move? Thanks

    Leave a comment:


  • boostedbbc
    started a topic Hobart TG-301

    Hobart TG-301

    Hi all new guy here with problems that I'm hoping the community can help me fix. I have an ancient Hobart TG-301 that has worked pretty much flawlessly for the better part of 7 years. It welds any project that I have without issue until lately. I cant control the amperage through the foot pedal anymore. I took the pedal apart and cleaned the rheostat and even though it ohm checked decently I replaced it with a new unit with the same result. Dependent upon what amperage level is selected on the machine I'm getting either the bottom or the top of the voltage range within that selection no in between what so ever. Can anyone point in the right direction to fix my issue? Please and Thanks

    Hobart TG-301
    serial 12rt-19996
    specs 4813a
Working...
X