Announcement

Collapse
No announcement yet.

westernarctronics 435 wiring help

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • westernarctronics 435 wiring help

    i just aquired this , was wired for single 220, checked wiring and it was all shorted and burnt, looks like the ground stud had burnt out a while back and they re wired to frame , currently has red and black as hot and white and green as neutral, i have three phase but is this a three phase machine, i dont see a place on rear to add line 3 just 1&2, if i remember right some old areas used to have 440 single phase, the 3 options for wiring are 208,220 and 440, guess i will have to re wire and test, just wondering if anyone has been down this road before or any ideas appreciated , i attached some useful pics and lit, thanks in advanceClick image for larger version

Name:	welder 004.jpg
Views:	1
Size:	62.3 KB
ID:	667177Click image for larger version

Name:	welder 003.jpg
Views:	1
Size:	59.7 KB
ID:	667178Click image for larger version

Name:	welder 002.jpg
Views:	1
Size:	50.2 KB
ID:	667179Click image for larger version

Name:	welder 001.jpg
Views:	1
Size:	58.6 KB
ID:	667180
Working...
X