Announcement

Collapse
No announcement yet.

Birddog

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Birddog

    I have a Miller XMT 304 CC\CV welder it stopped welding the fault code was HEL-P7 which the manual says the input power was out of range on the high side. I powered the unit down and checked the line voltage coming in it was at 240 volts .When I powered it back up it will not do anything no messages at all on the screen. The unit is set up to Auto Link.Any assistance would be greatly appreciated.

    Thanks
    Birddog
Working...
X